行业新闻

当前位置:首页>新闻中心>行业新闻

老化房得用途及普及

作者: 时间:2022-10-09 浏览:165
摘要:老化房也被称之为烤机房,这种房子并不是用来大家居住的,而是用来检验机械设备的。因为这种老化房里面的温度特别高,所以他们会使用这种方法来检测这些电子产品是否能承受这样的高温?其实它就是一种恶劣环境测试的一种密封空间。举个很简单的例子,像我们平常使用的电脑和手机,开关电源、手机充电器、电池、LCD、主板机、...


老化房也被称之为烤机房,这种房子并不是用来大家居住的,而是用来检验机械设备的。因为这种老化房里面的温度特别高,所以他们会使用这种方法来检测这些电子产品是否能承受这样的高温?其实它就是一种恶劣环境测试的一种密封空间。举个很简单的例子,像我们平常使用的电脑和手机,开关电源、手机充电器、电池、LCD、主板机、扫描器、监视器、介面卡等做负载或温度老化测试的一种设备这些电子产品中有很多零件,在组装这些电子设备之前,都需要经过高温老化房的检测,如果检验不合格的话,那这些零件都是不良零件。


The aging room is also known as the baking room. This kind of room is not for everyone to live in, but for testing mechanical equipment. Because the temperature in this aging room is very high, they will use this method to detect whether these electronic products can withstand such high temperatures? In fact, it is a kind of sealed space for testing in a harsh environment. Take a simple example, such as computers and mobile phones, switching power supplies, mobile phone chargers, batteries, LCDs, mainboards, scanners, monitors, interface cards and other devices that are used for load or temperature aging tests. Many of these electronic products need to be tested in the high temperature aging room before they are assembled. If they fail to pass the test, they are defective parts.





e8206b79575618f4da36e2876bb94a5c_2-210105155ZL06.JPG




老化房 
1.主要技术参数:
1.1 温度范围:常温+10℃--85℃(温度可以订制)
    1.2 温度波动:±0.5℃;
    1.3 温度偏差: ±2℃(可根据客户要求设计精度,在一定条件下 高可以做到±1℃)
    1.4 房内尺寸:温度可以订制
    1.5 运行方式:温度可调,恒定运行或程序运行(可选触摸屏式程序运行)
  1.6 安装电源:AC~380V;50 Hz;
    1.7 噪音大小:≦65分贝

所以很多电子产品在出厂之前,就需要经过高温老化房的考验,看看在高温情况下,他们是否能够承受住,如果可以,就视为合格。这么高的温度,而且老化房一般都是在工厂里面

Aging room


1. Main technical parameters:


1.1 Temperature range: normal temperature+10 ℃ - 85 ℃ (temperature can be customized)


1.2 Temperature fluctuation:± 0.5℃;


1.3 Temperature deviation:± 2 ℃ (the design accuracy can be based on customer requirements, and under certain conditions, it can be as high as± 1 ℃)


1.4 Room size: temperature can be customized


1.5 Operation mode: temperature adjustable, constant operation or program operation (optional touch screen program operation)


1.6 Installation power supply: AC~380V; 50 Hz;


1.7 Noise level: ≤ 65 dB




Therefore, many electronic products need to pass the test of aging room before leaving the factory to see if they can withstand the high temperature. If they can, they will be regarded as qualified. The temperature is so high, and the aging room is usually in the factory.www.wangda17.com




上一篇:高低温试验箱厂家:高低温试验箱加热方式
下一篇:高温老化房常用领域及老化房常规保养。
联系我们
Contact
联系我们
我们很想听到您的声音

电话:0755-88849117

手机号码:13554923055

传真:0755-29802389

Email:13554923055@139.com

地址:深圳市光明新区公明镇西田第一工业区18栋

微信扫一扫二维码

[向上] 

热门导航 links

老化房 高温老化房 恒温老化房 老化柜 老化试验室 步入式恒温恒湿房